Lipstick mould set

A high-quality and easy-to-use moulding set for making lipsticks, solid lip balms and concealers. Fits the lipstick container in our range.

Nominal volume 4 ml, diameter 11.5 mm.

For pouring into the container in our range, it is recommended to prepare a volume of approximately 5 ml of lipstick.

How to use

1. fit the lipstick mould with the gold ring so that the edge of the lipstick mould fits into the groove of the ring.
2. insert the lipstick mould into the plastic holder, top side down.
3. pour the warm composition into the mould up to the top of the ring and leave for a while until it solidifies.
4. before removing from the mould, place in the freezer for a few minutes
5. remove the lipstick mold with the ring from the plastic holder, remove the gold ring and insert the obtained lipstick into the lipstick container
6. widen the silicone mould with gentle movements so that air gets between the silicone mould and the hardened stick
7. slowly and carefully push the stick out of the mould