Gentle Cleansing bar
Formula: 5129 Difficulty level: beginner Shelf life: min 12 months

Phase Ingredients Dosage % Total 70 gr
A Ricin oil 10 7 gr
A Stearic acid 10 7 gr
A SCI Surfactant 54,7 38 gr
A Coco-betain Surfactant 10 7 gr
A Distilled water 12 8,4 gr
B Cotton Pillow fragrance oil 3 2 gr
B Vitamin E 0,3 7 drops

1. Heat the ingredients of phase A in a heatproof glass on a water bath. Mix slowly and thoroughly in the meantime. When a smooth paste has formed, remove from heat.

2. Add the ingredients from phase B to phase A and mix well.

3. Quickly transfer the mixture to a soap mould and tap the surface well.

4. Leave to harden on a flat surface for at least 4 hours. Remove the mold from the mold and place on a towel or rack to dry. After 48 hours it can be used.

The result is a gentle but effective soap-free hygiene product that forms a rich creamy lather that gently cleanses the skin, leaving it smooth and velvety

Reviews

E
Ellemental
13 Jan
Hello Andreea, You can use any other aromatic extract as you prefer. Strawberry aromatic extract is an optimal choice in combination with Cherry Blossom natural fragrance. Good luck!
A
Andreea B.
13 Jan
Hello. I notice that you still have the apricot aromatic extract. Can you use another flavoring extract? For example strawberry or does it influence the final result?
C
Claudia O.
04 Jun 2023
can you introduce 1% kojic acid in this formula? thank you !
E
Ellemental N.
13 Apr 2023
Hello Raluca, In order to obtain an optimal consistency, we recommend the following: - avoid continuous mixing of phase A during heating - avoid foaming of phase A due to too frequent mixing during heating - wait 1-2 days after pouring into the mold before use
R
Raluca O.
03 Apr 2023
Hello, I have tried the recipe, but it seems slightly softer than other similar recipes with tenside SCI. How can I influence the hardness? Can I add more stearic acid? If so, in what percentage? Thanks a lot!
c
21 Feb 2022
Hello! We look forward to your recipe! :)
A
Ana V.
11 May 2021
I can't help myself :) I made a creamy shower gel according to the following recipe (+/- a few ml) : -silver 41% -glycerin 7% -tenside consistency 21% -tenside solid SCI 4% -tenside solid SCI 4% -tenside coconut likida 10% -oil / butter 7.5% -cetearyl 4% -glyceryl oleate 4% -perfumant 0.9% (or less, I put it like this to get the total percentage 100%) -cosgard 0.6% and it came out Perfect as consistency.(more likid in the first 24 hours, but the next day is more vascos).Mise seems to dry a little more than I would like from a creamy shower gel - too many tensides? What should I change to make it creamier (as skin feel) and a bit more foaming? reverse the percentages of consistent tenside and coconut tenside and at the same time decrease some of them? I was pleasantly surprised by my success..partial - and I'm surprised that it leaves such a sensation since I used glyceryl oleate..maybe I have more sensitive skin?! I look forward to the professional version :) thanks a LOT for the inspiration :)
A
Ana V.
07 May 2021
Thank you! :)
E
Ellemental
07 May 2021
Hello! It is possible to devise a creamy shower gel recipe with SCI and cetearyl alcohol, I have noted the suggestion in the formulations diary. In that recipe, one can substitute the washing base with consistent surfactant but being the difference in pH and viscosity, other changes are probably needed. In Bucharest, you can find the widest range of our products at Farmacia Tei or Bebetei.
A
Ana V.
06 May 2021
hello :) is it possible to obtain some liquid-cream with the help of tenside SCI? i wonder if it is possible to make a creamy shower gel with this tenside.. (i.e. can i use tenside SCI (also) as a viscosity increasing factor - possibly with the addition of varisoft or cetearyl - this should have been put in the recipe proposals :( ) in another vein - because i can't ask about the creamy shower gel - can i replace the soft lavender base with the consistent tenside? and stearic acid with cetearyl? only when I happen not to have the products specified in the recipe - as for example now... My apologies for the stupid questions, it's hard to find a similar product here (I look at the ingredients and I can't find something that contains exactly the same things) with the lavender base, for example... And thanks for your patience! I have such a list of products to buy for when I get home that I wonder if you have a place where I can pick them up in person in Bucharest? a place with some products exposed... Have a wonderful day!!
E
Ellemental
29 Jul 2020
Can be added, but not necessary.
G
Gioga D.
03 Jan 2019
Can stearic acid also be added to cold prepared caustic soaps?
E
Ellemental
30 Nov 2018
Hello! Honey can be added, but milk we can't recommend, we haven't done any tests on this.
S
Sat S.
28 Nov 2018
Hello! Can you add pasteurized milk and honey to this cleanser? If yes, how long would be the shelf life? As that of the milk or does the cleanser help to preserve it? Thanks!
S
Sat S.
28 Nov 2018
Thanks for your answer!
E
Ellemental
20 Nov 2018
Hello! Industrial methods can't always be reproduced in a manufacture, unfortunately. For such a syndet bar, high-capacity melting and homogenizing machines are used, and the composition is generally also passed through a vacum/emptying machine to remove all the air from the paste - thus achieving that specific compact look.
S
Sat S.
19 Nov 2018
Hello! I am very pleased with these cleanser-e and have tried different personal recipes , with success, inspired from your information . However I haven't found a variation to make the paste softer to be able to be put nicely in shape. Looking at the ingredients of DOVE soap , I notice that is also such a cleanser and in his case it achieves a liquid consistency of the paste before molding , since it comes out so beautifully soap . Oare you can help us in this regard? To further sell these cleansers we need to give them a beautiful, attractive shape. Thank you very much!
E
Ellemental
08 Oct 2018
Hello! Indeed, with this flake form of tenside SCI it is more difficult to work with. Unfortunately, the manufacturer has made the change and the fine-grained version is no longer available, and for this reason we are looking for another manufacturer; we have decided that until then we will still have this product on offer.
A
A.M.
06 Oct 2018
Hello, I prepare this product for a long time with great pleasure because it is a very good product. The problem is that since you changed the solid tenside, the preparation time increases extremely extremely extremely. (After an hour sitting on the water bath, it was not fully melted ) Can you somehow not go back to the old version of Sci solid tenside, in pearlized form? Thanks!
E
Ellemental
05 Jul 2018
Hello. No, it just melts and has the appearance of a white paste.

Similar articles

Solid face cleanser
Solid face cleanser
Formula: 32801 Difficulty level: medium Shelf life: min 6 months pH optimal: - Phase Ingredients Dosage % Total 50 gr A Coconut oil 10 5 gr A Stearic...