Ocean waves soap

Formula: 34108	Difficulty level: medium	Shelf life:min 6 months

Phase	Ingredients	Quantity
A	Melt&pour Soap Base White	1 kg
A	Pure/distilled water	50 ml
B	Green soap colour	2 drop
B	Blue soap colour	3 drop
B	Red + Blue soap colour	2 + 1 drop
B	Lavender essential oil	20 ml
B	Eucalyptus Globulus essential oil	10 ml
B	Natural fragrance oil Fresh Marine	10 ml

1. Dilute the dyes with 30 drops of water, separately, each in a pouring cup. Add an essential oil / fragrance over the dyes.

2. Melt the soap base plus the added water in a water bath in a heatproof dish covered with foil. Easier melting can be done in the microwave.

3. Divide the completely melted soap into 3 roughly equal portions, pouring it quickly into the three cups prepared in step 1.

4. The contents of the 3 cups are stirred briefly and vigorously, then poured into the block soap mould, one after the other, from the corners of the mould.

5. Finally, spray a little alcohol onto the surface of the poured soap to release the air bubbles. Leave to harden on a flat surface.

6. After 24 hours, remove the soap from the mould and cut into the desired thickness using the wooden soap cutter.

This formula was developed by Elemental's qualified staff. The recipes are intended to exemplify the use of products marketed by Elemental and are believed ... to be accurate, Elemental assumes no liability or risk associated with the use of its products for the preparation and evaluation of the recipe as the conditions of preparation and use are beyond its control. The person who prepares the recipe must refer to the safety data sheets to ensure the safe handling of all raw materials and bears full responsibility for ensuring the safe and correct use and storage of all materials procured and used. Elemental is not liable for any damages resulting from the use of this information, and assumes no responsibility for misuse of selected materials, formula or method, in whole or in part. For commercial use, assessments of the safety, stability, regulatory compliance and suitability of this recipe, methods and the finished product are the sole responsibility of the user and/or the legal entity placing the product on the market.