| Formula: 34108 | Difficulty level: medium | Shelf life:min 6 months |
| Phase | Ingredients | Quantity |
| A | Melt&pour Soap Base White | 1 kg |
| A | Pure/distilled water | 50 ml |
| B | Green soap colour | 2 drop |
| B | Blue soap colour | 3 drop |
| B | Red + Blue soap colour | 2 + 1 drop |
| B | Lavender essential oil | 20 ml |
| B | Eucalyptus Globulus essential oil | 10 ml |
| B | Natural fragrance oil Fresh Marine | 10 ml |
1. Dilute the dyes with 30 drops of water, separately, each in a pouring cup. Add an essential oil / fragrance over the dyes.
2. Melt the soap base plus the added water in a water bath in a heatproof dish covered with foil. Easier melting can be done in the microwave.
3. Divide the completely melted soap into 3 roughly equal portions, pouring it quickly into the three cups prepared in step 1.
4. The contents of the 3 cups are stirred briefly and vigorously, then poured into the block soap mould, one after the other, from the corners of the mould.
5. Finally, spray a little alcohol onto the surface of the poured soap to release the air bubbles. Leave to harden on a flat surface.
6. After 24 hours, remove the soap from the mould and cut into the desired thickness using the wooden soap cutter.
